1.  First clean the lamp with warm soapy water. 

2. Give the lamp a light sanding using P.600 sanding paper and move up to P.800.

3. Sand untill a smoth clear finished is obtained. 

4. Mask off all surrounding areas using fitoplas.

5. Use BesaSol94 plastic cleaner to wipe clean all dust using a lint free cloth. 

6. Activate your 2k Aerosol and give lamp one more wipe down using a dry tack cloth. 

7. Apply first coat lightly over the lamp and allow ten minutes drying time. 

8. Apply another 2/3 coats always allowing drying time in between. 

9. Leave dry for 24 hours before refitting.