Barpimo® 2K Epoxy Floor Paint RAL 7038 Grey – 17lt Kit

Description

Barpimo® 2K Epoxy Floor Paint RAL 7038 Grey.- 17lt Kit. Complies with the requirements in standard UNE-ENV 12633:2003 method for determining the value of slip resistance of polished and unpolished floors – Class 3. Excellent on concrete and cement floors. Easy to apply with good covering and  filling power. High hardness and balanced elasticity. Resistant to abrasion, to wear, mopping, oil spills, mineral oil and other chemical agents and dirt in general. Eliminates the formation of dust on the floor, improves surface hardness, avoids erosion and wear and tear making the floor easier to clean.

Properties:

• Hard-wearing.
• 1 litre covers 7 – 9m2/lt
• 5-6 hours drying time.
• Repaint after 24 hours
• Ultra adhesive.
• Washable.
• Application by Brush, roll or spray
• Ral 7038

Perfect for:

• Garage Workshops
• Warehouse Floors
• Factory Floors
• Carparks
• Shop Floors

How to apply

Stir the contents of the pot well. Prepare the amount to be used. Shake until completely mixed. Product is supplied in 3 containers – Component A (Paint) and Component B (hardener)  Component C (thinners). Mix proportion (by volume): 3 parts of A” and 1 parts of “B”.” and on the first coat thin 10 to 15 % with Epoxy thinner. Allow to sit for 30 minutes before using. Use with 3 max hours at 20 ºC. Apply in well ventilated area and in thin, even coats. Reapintable after 24 hours.

Kit Contains:

• 12 litres of Epoxy Floor paint + 4 litre of Epoxy hardener + 1 litre Epoxy thinners A9761 and will cover 115 to 150 square metres approx giving 1 coat.