COLORCAN® CASE INTERNATIONAL POWER TAN 1K ACRYLIC SPRAY – 500ML

Description

COLORCAN® CASE POWER TAN 1K ACRYLIC SPRAY 500ML

Gives an excellent UV resistant finish that provides good gloss levels and opacity. Drying times are fast allowing quicker handling of articles. Can be applied directly to metal substrates and has anti corrosive properties. The product will adhere directly onto Mild Steel and other ferrous substrates.

Hundreds of colours available including a selection of RAL, Agricultural and Construction colours.

Features and benefits

• Coverage- 1.5 – 2 m2
• Dry to handle- 10 – 20 mins
• High-quality Acrylic finish
• Excellent durability – resistance against weathering and UV influence
• Very fast drying – touch dry in 10 minutes
• Outstanding opacity – less coats and time required
• Lasting gloss level
• Excellent adhesion to many substrates
• Pipeline and safety colours

Suitable substrates

• Agriculture
• Plant & Machinery
• Construction
• Fabrication
• Cladding
• Transport

Application guide

• Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means.
• Prime or spot prime with the recommended ProXL Primer.
• Sand intact coatings to provide a proper key for adhesion.
• Shake aerosol for at least two minute after the agitator ball is free.
• Shake aerosol during use
• Apply at a distance of 25 cm from the treatment area
• Apply several coats allowing for a 5 – 10 mins flash off between coats
• After use turn aerosol upside down and empty valve for 2 – 3 seconds