Description
Cuprinol Wood Preserver Clear (BP) is a colourless general-purpose preserver for interior (occasionally wet or interior wood with risk of condensation) or exterior use. It gives deep penetrating protection to sound wood against decay, mould and blue-staining fungi. This low odour formula has been specially developed with low aromatic solvents to make it more pleasant and convenient to use.
Application Description
- Apply 2-3 uniform coats with a brush or dip for at least 3 minutes if practical.
- Apply the second coat after the first has soaked in.
- This product may take 1-5 days to dry fully under typical conditions.
- The application of this product may cause darkening of some timbers.
- If colour is critical try a test area to ensure acceptable appearance.
- To ensure thorough protection, treat all surfaces.
- Apply to any surfaces cut after treatment.
- After drying, glues, fillers, mastics and knotting can be used normally.
- Ensure wood is fully dry (allow 6-8 weeks), or use a vapour barrier such as heavy duty polythene (as used for damp proof membrane), before laying plastic floor coverings, rubber backed carpets or underlay, hanging vinyl wallpaper or using mastics.
- Do not spill on asphalt, bitumen, bitumen felt, tar, plaster, plastics, paint, etc.
- Where required, finishes (solvent-based or water-based paints, varnishes, woodstains and polishes, etc.) can be applied normally to treated wood after the preserver has dried (normally 1-5 days for brush or 3 minute dip, but may be longer in cold weather).
Reviews
There are no reviews yet.