Dulux Trade Diamond Glaze Varnish Gloss – 5Ltr

Description

Diamond Glaze from Dulux Trade is a water-based maximum durability interior clear wood varnish. It is a simple one pack system and is ideal for use on wooden floors and other high wear interior wood surfaces. It is up to ten times tougher than conventional varnish and is resistant to common chemicals, alcohol and water. Suitable for use over materials such as cork tiles, hardwood and chipboards.

Main Features:

• Floors, doors & other joinery
• Water-based
• Touch dry: 1-2 hours.
• Recoatable: 2-4 hours.
• Coverage: 25m2 per litre (normally 2-3 coats new bare wood)
• Thinning: Should not be thinned.

Application: Brush or short pile mohair roller only. Do not spray.STIR THOROUGHLY BEFORE USE. Seal all new or bare wood by applying one coat of Clear Gloss Diamond Glaze from Dulux Trade. Apply 2 or 3 coats of Diamond Glaze from Dulux Trade. Apply evenly and consistently, taking care to keep the wet edge; alive and finish off along the grain. Apply a small test area first to check adhesion and appearance. When recoating allow at least 2 hours between coats. Rub down lightly along the grain between coats using a fine grade adhesive paper. Light foot traffic is allowed after 24 hours but to prevent possible damage to floor while the full mechanical resistance develops, avoid heavy wear and do not replace carpet or rugs or move furniture for at least 7 days after application.