Flame-Retardant Varnish Satin – Water Based

Surface preparationSurfaces should be clean, dry and consistent. On unprotected surfaces: Clean, sand and remove dust, grease, oil, waxes and small imperfections. Apply your preferred colour stain first. To stain new timber or wood or to  increase resistance to the outside, apply successive layers of your water based stain of the chosen color until you achieve the desired shade and finish with two coats of the FIREPROOF VARNISH.

Before applying

Application temperature: Higher than 8ºC. Support temperature: Above 8ºC. Ambient relative humidity: Less than 80%. Stand Humidity: Less than 20%

How to use

Remove the contents of the container well. Apply with good air movement, in thin, uniform and well-extended layers. Brush or Roller: Apply 1st coat thinned with Water 5-10%. and the 2nd and 3rd coat use or thin maximum 5%. Sand gently between coats.