Galvanised T-Wash Mordant Solution 5lt

Description

Galvanised T-Wash Mordant Solution.

•  T-Wash is a mordant solution for the preparation of pre-treated Galvanised surfaces prior to painting.
•  T-Wash is a blue solution that turns galvanised/zinc treated surfaces black when properly applied.
• The product contains small amount of Phosphoric acid. Suitable goggles, facemasks and gloves must be worn at all times.
• 5lt size.

APPLICATION

All surfaces to be treated must be clean, dry and free from grease and mill scale. Apply the solution with a brush or swab and allow the reaction to take place (surface colour will turn black when successfully applied).
If the reaction doesn’t take place, this is a sign that the pre-treatment has not been effective. This may be due to insufficient cleaning or degreasing of the surface. If this occurs, re-apply solution after further preparation.
If white deposits form, this indicates excess solution. Wipe off with lint free rage.
If the solution remains in seams, corners or crevices after conversion, swill out with water. Make sure that all surfaces are dry before continuing with the coating cycle.