Marine Varnish Gloss with UV Filter

Description

Marine Varnish Gloss with UV Filter.

Suitable for the protection and decoration of boats and wood buildings in coastal areas and interior & exterior household wooden furniture.

• Resistant to marine environments.
• Incorporates a UV filter.
• Highly Elastic finish.
• High Filling power.
• Resistant to the expansions and contractions of wood.
• Available in 4lt & 750ml sizes
• High Gloss.

Surface preparation

Surfaces should be clean, dry and consistent. On unprotected and unvarnished surfaces: Clean, sand and remove dust, grease, oil, waxes and small imperfections. On surfaces with aged and deteriorated varnish: Remove these layers and proceed as in the previous case.

Before applying

Application temperature: Above 10ºC. Ambient relative humidity: Less than 70%. Humidity of the support to be applied: Less than 20%

How to use

Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Percentage of application: Brush, 1st coat diluted 5 – 10% with Synthetic thinners  (Ref. 9971). and 2nd and 3rd coats use slightly diluted (maximum 5%) . For Spray Gun application, Depending on the nozzle and pressure used in the application. Apply three properly diluted coats (10 – 15%), sand gently between coats to facilitate adhesion and improve the finish.