Preparation:

• The surface you want to treat has to be clean, dry and free from rust and fat as well as smooth and solvent-resistant.
• Do not paint on porous or rough surfaces. From smooth surfaces you can easily peel off the film afterwards.
• Do not prime!
• Mask the area wich you do not want to paint carefully with paper.
• Before application, the object which you want to paint, has to be cleaned thoroughly from fat, oil or silicone with a customery, not too sharp cleaning agent

Application:

• Before use, shake the can thoroughly for 2 – 3 minutes.
• Test the spray at an unobstrusive spot; this makes sure that the can’s contents has the desired colour, and that the surface is compatible with the paint.
• Spray crosswise layers from a distance of 25 cm. Apply a very thin layer first (do not try to get coverage immediately). Then apply at least 4 more layers of product.
• The more layers you apply, the better you can remove the foil afterwards.
• It is important to allow each layer to dry for approx. 10 minutes, before you apply the next coat. This way you can apply coat after coat.
• In case you wish a high-gloss surface, you can apply 1 cross-coat of the Motip Removable coating Gloss Finish

Advices for the painting of wheel rims:

• Carefully mask wheels and inner surface of the rim with e.g. paper. To fix the paper you can use customary masking tape.
• Remove the masking paper and tape immediately after painting the last layer.
• To avoid that the paint coat cracks, you should coat sufficiently thick in critical areas (e.g. angles and edges). Anyhow, you can easily repair cracks and damages in the film by applying a new coat of SPRAYPLAST.

Advices for the painting of Neon colours:

• It is necessary to have a white undercoat of Motip Removable coating white. Please apply 4 coats in white and one coat in the Neon colour.

Advices for the painting with Gloss Finish:

• You can use the Gloss Finish as final coat to give earlier painted matt or satin-gloss shades a high-gloss. In this case you have to apply 4 coats of colour shade and 1 coat of the Gloss Finish
• If you use Gloss Finish as a transparent high gloss protective coat, you have to apply 5 coats of the Gloss Finish.

After application:

• Approx. 6 – 8 hours after applying the last coat, the Removable Coating is fully dry.
• The painted coat does resist very good to customary cleaning agents.
• It is also possible to clean the rims in the car washer.
• In case of steam-cleaning, keep a distance of at least 25 cm.