Paint & Peel Liquid Masking Film White

Description

Paint & Peel Liquid Masking Film White

• Just Paint & Peel.
• Extremely fast & easy to use.
• Clean removal – just peels off.
• Can be sprayed, rolled or brush applied.
• Perfect for glassed timber doors.
• Can also be used as a protective film for external environments.
• Water based so low toxicity.
• Available in 1KG & 5KG

Application Guide.

1. Prepare Surface by removing all debris & dust and sand timber down. If the timber had been previously painted ensure the timber is fully sanded before applying Paint & Peel.
2. Stir thoroughly then apply Paint & Peel with either a synthetic bristle brush, long nap roller (mid pile) or conventional airless sprayer, recommended fluid tip size of 0.013 to 0.017. Theoretical coverage 2mt square per litre @ 200µ DFT.
3. Leave to fully cure – once Paint & Peel is fully dry repeat process for a 2nd coat – should take 30 to 60 mins.
4. When the painting process is finished remove the Paint & Peel by cutting around the inside edges of the frames with a sharp knife & simply peel away from the substrate.
5. After use clean any application tools with warm water.